A non-functioning toilet flush, a blockage in the sink or a blockage in the shower are some of the common daily household problems faced by every homeowner at some point in life. Generally, when these situations arise, you often end up calling a plumber in the first place. But did you know you can also fix the issue without the help of a Carlsbad plumber all by yourself? Thanks to a plunger, a one-stop tool that can fix all these issues effortlessly. But there are certain tips and tricks to use a plunger in the correct manner.

Following Are The Steps To Use A Plunger The Correct Way For Different Plumbing Issues:

1. For Unclogging A Toilet

Step 1: One needs to choose a proper plunger for a particular task. When it comes to unclogging a toilet, you need a flange-style plunger. A flange-style plunger is the best choice for unclogging a toilet. You need to grab the tool and place the rubber padding on the whole of the toilet. The idea is to create a seal and make sure no gap is there. If you are able to seal the whole properly you can easily unclog the toilet without putting much effort.

Step 2: Next hold the handle absolutely straight and make sure no angle is created. If the wooden handle is held straight up, it will create maximum suction and it won’t break the seal.

Step3: Now move the handle up & down for about 30 seconds. This process is known as burping. Note that the more force you put the more suction will happen. While doing so just make sure the airtight seal is not broken, even If you end up doing so, place it back in the correct position.

Step 4: After doing this for some 30 seconds, pull the handle up and drain the water. If still the toilet seat does not get unclogged, you need to call a toilet repair agency.

2. For Unclogging Showers & Sinks

Step 1: First you need to cover the drainage hole of the skin with a rug or towel. If this is not done, the plunger won’t be able to work effectively as the sea will be broken. In the case of showers & kitchen sinks you do not need to insert a towel in the drainage holes as most of them do not have any.

Step 2: Next you need to draw out the excess water from the clogged sink before starting the burping process.

Step 3: Now seal the plunger on the sinkhole and move the handle up & down for the next 20 seconds. While doing so just make sure you do not pull the plunger too hard as it will break the seal.

Step 4: After 20 seconds, lift the plunger up & drain all the water. If still you are unable to unclog the sink, then you need to call a professional plumber Carlsbad and get the issue checked.

Before calling any plumbing services for fixing any clogging issue, it’s better to purchase a plunger and try
unclogging it.